Measures to Fix Arlo Error Triggering Base Station Update
Numerous users have complained that they tried to update the Arlo app after ARLO SETUP only to come across a new update for the device. When some of them attempted to execute the process, the app displayed, “Arlo error triggering base station update” message.
Are you also experiencing the same problem? Yes? Well then, you should try to reconnect the station. Following this did not help you? No problem. We have explained in detail some solutions below through which you can fix the error on your screen.
Fixing Arlo Error Triggering Base Station Update
1. Sync the Base Station Again
Prior to doing anything else, it is recommended that you sync the base station again. For the execution of the process, you need to first locate the SYNC BUTTON on the base station. You will find that it is located on the side of the back of the base station. When you find it, press it for about TWO SECONDS. Once done, you need to release the sync button. It is recommended that you wait for the SYNC STATUS LED to blink GREEN in color.
For your information, if you press the ARLO WIRE-FREE SYNC BUTTON on the Arlo base station for way too long, the LED which is located under the USB SYMBOL will become AMBER for straight 10 MINUTES. While this happens, the sync process will be blocked.
2. Check the WiFi Connection
Over the last few weeks, some users have had issues in getting firmware updates due to poor internet connectivity. Chances are that the Arlo error triggering base station update problem is troubling you due to the same godforsaken factor. Given this, you should check the speed of your internet. Is it fast enough? In case, it is not, then you need to do what you did not do sooner, i.e. getting in touch with your ISP.
Explain the entire situation to your ISP or INTERNET SERVICE PROVIDER. If he can make amends, well and good, if he cannot, then it means that there is some other reason why the issue in discussion occurred. To learn how to resolve it once and for all, continue reading.
3. Reset the Arlo Base Station
At times, no specific reason surfaces when it comes down to figuring out what caused the technical issue. In case the same is the situation with you, then you should not think twice before you reset or restore the Arlo base station. Are you not sure how to go about the process? No problem. You just need to read the instructions which are given below to reset the base station in a hassle-free manner.
Locate the RESET BUTTON on the base station and press it using a pen for about 10 SECONDS. After waiting for the mentioned time, release the button. Once the process finishes, the LED LIGHT located on your base station will flash AMBER.
What to Do After the Light Changes Color?
As soon as the LED light stops flashing amber, your base station will give itself a new start. Now, you need to remove the base station from the account in order to prevent yourself from experiencing potential problems.
For this, you ought to launch the Arlo application and do Arlo login. Select SETTINGS > MY DEVICES. Choose the device which you are interested in removing and then, go to the bottom of the page. Click REMOVE DEVICE. Select the YES to confirm your decision.
Now the time has come for you to re-add the base station. For the execution of the process, you need to log in once again if you have logged out, go to the Devices page, and tap the ADD NEW DEVICE button. Select BASE STATION and go through the instructions.
Soon you will be able to reconnect the base station to the account. At last, you can use the ARLO APP to add as well as set up the rest of your Arlo devices with ease. Want to learn how? Go through the steps given in the manual.
We are wrapping up the troubleshooting guide based on what can be done to resolve the Arlo error triggering base station update problem. Were you able to resolve the issue with the solutions given below? Nodding your head in yes? Good. Now, you are free to take full advantage of your Arlo device. To learn about troubleshooting similar problems, it is recommended that you visit this website often. Every week you will find something new to learn here, whether it is about a new feature or tips to troubleshoot the latest issue.