How to Update Arlo Firmware Manually?
Arlo releases automatic firmware updates for all its devices on a regular basis. Automatic updates generally happen between 3:00 AM to 5:00 AM due to which you might be unable to stream during this time. To prevent that, you can complete Arlo firmware update manually when it is not in use.
Although you can’t view your camera live during a firmware upgrade, your camera will still be able to detect motion and sound. It will record depending upon the operating mode you have selected.
In this blog, we will discuss simple steps to update Arlo firmware manually so that the process can be completed without any inconvenience.
Note: If you own an Arlo Go camera, know that its firmware update will use cellular data. Minor firmware updates can consume up to 8MB of data. They occur once every 3 months. On the other hand, larger updates require 52MB data and they happen about once a year.
Steps to Perform Arlo Firmware Update for Camera
You can update the Arlo firmware either by visiting my.arlo.com login address or with the help of the Arlo mobile app. Here’s what you have to do:
- Connect your mobile phone or PC to the same 2.4 GHz network as your Arlo camera.
- Once done, launch the Arlo app on your phone or go to my.arlo.com on your PC via an internet browser.
- As soon as the screen prompts you to log in, input the login details of your Arlo account.
- Once logged in, select Settings.
- Tap/click My Devices.
- Select the Arlo camera model you wish to update.
- Choose Device Info.
- Tap or click Firmware > Update.
- Wait for the Arlo camera firmware update to complete.
Warning: You must not open the battery door or remove the camera battery while the Arlo firmware update is in progress. If you remove the battery from the camera’s casing, power will be interrupted and your camera might become unusable.
This is how to update Arlo firmware for camera. This is to inform you that the LED on your camera will blink blue and amber alternatively during the update. This light goes off after 1-2 minutes. The moment the camera firmware update finishes, the camera syncs with the Base Station again and the LED light starts blinking blue rapidly.
How to Update Arlo Firmware for Base Station?
If you own an Arlo SmartHub or Base Station, you should update its firmware too. The process is very similar to updating the camera firmware. The steps to complete Arlo firmware update for a Base Station are listed below:
- Launch the Arlo app on your mobile that is connected to your Base Station.
- Complete Arlo login using the valid account details.
- Tap My Devices under the Settings option.
- Choose your SmartHub or Base Station.
- Under the Device Info, select Firmware > Update.
- This will initiate the firmware update process.
- Wait and let the Base Station or SmartHub firmware get updated.
The LED light on your Base Station also blinks blue or amber like most Arlo cameras. When the SmartHub/Base Station will be back online, it will notify you by solid blue light. Your Base Station will reboot after the firmware update. Also, do not disconnect the phone from Base Station until the firmware gets updated. Your mobile phone should have at least 15% battery. Otherwise, the Arlo firmware update not working error message is likely to show up on the screen.
In a Nutshell
We are now putting a full stop to the discussion about how to update Arlo firmware manually. It is anticipated that using the instructions given here, you will be able to complete Arlo firmware update without any difficulty.