Getting Arlo Error Code 4208? Here’s the Fix!
As soon as you install an Arlo wire-free camera in your home, you can use the Arlo camera login account to customize its basic and advanced settings plus upgrade the firmware. Wait! What’s that? Are you getting the Arlo Error Code 4208 during the firmware update process? And the process doesn’t seem to come to an end. Wondering why so? Not anymore as you have landed on the right post. Here, you will get to know common reasons behind the issue as well as various troubleshooting tips to get the Arlo firmware update issue fixed within a matter of minutes. Let’s get the ball rolling.
Reasons: Arlo Error Code 4208
There can be various reasons why you have come across the 4208 error code during the camera’s firmware update process. A few of them are listed below:
- Poor network connectivity
- Improper configuration of your camera
- Firmware compatibility issues
- The placement of the Arlo camera is not correct
Fixed: Arlo Error Code 4208
Here are the relevant troubleshooting tips to get rid of the firmware update error you are witnessing with respect to your wireless security camera:
1. Reboot Your Arlo Camera
Rebooing is the basic and simplest method to resolve any technical issue. Follow the instructions given below to reboot your Arlo wireless camera:
- Power off your Arlo camera.
- Slide the battery door and take the battery out from the camera.
- Wait for some time.
- Insert the battery again.
- Turn the camera back on again.
Once done, try updating the firmware of your security device. If you’re still getting the Arlo error code 4208, move to the next troubleshooting tip.
2. Check the LED Status
As soon as you close the camera battery door, keep an eye on its LED behavior:
- If the LED is off: Make sure that the batteries are inserted in the correct orientation. Also, confirm if the batteries are not completely dead.
- The LED is blinking blue rapidly: It shows that the camera is connected to the cloud. In such a case, log out from your Arlo account and redo the Arlo camera login.
- Amber LED light: Replace the Arlo camera batteries right away.
3. Sync Your Arlo Camera
On the off chance you’re getting the error code after switching to a new router or making changes to your WiFi network, then press the sync button on your Arlo camera. Once done, your wire-free camera resumes normal operation.
After that, try to install the latest firmware version on your camera and see if you get successful this time. If not, then the connectivity between your devices might be the culprit.
4. Check the Camera Connectivity
Note the distance between your Arlo camera and the base station. In case your camera is placed farther away from the base station, you may see the Arlo error code 4208 during the firmware update. In addition, your will soon come across the Arlo not storing recordings issue if thick walls, ceilings, or metal objects exist between the base station and the camera. So, make sure to place your Arlo camera accordingly.
5. Check Your Arlo SmartHub Status
Monitor the Internet LED of your Arlo SmartHub or base station to check its connectivity status. In the event that the LED is solid green, it signifies that the base station is connected to the internet.
On the other hand, the amber LED shows that the base station is not connected to the internet. In such a case, verify if the Ethernet cable is not damaged. If the cable has any sort of damage, replace it with a new one immediately.
EndNote
That’s how you can fix Arlo error code 4208. We are expecting that you will be able to install the latest firmware version on your camera and will have an enhanced security experience with the camera.
