Is Your Arlo Doorbell Not Working? Try These Solutions!
An Arlo doorbell sends to you alerts when a motion is detected. These alerts are sent to via Arlo app. If your Arlo doorbell is not working, you can take the help of the troubleshooting solutions given in this post and get a wide 180 degree field of view of what’s happening in front of your door.
Solutions: Arlo Doorbell Not Working
Here are the solutions that you should follow if the Arlo doorbell is not working for you. This is for your general information that the points given below apply to audio as well as video doorbell. Thus, you can use them for both.
1. Check the Temperature Around Doorbell
Temperature affects the working of a doorbell a lot and makes it go offline. Your Arlo doorbell must operate under an outdoor temperature ranging from -20C to 45C (-4F to 113F). Thus, you should ensure that the doorbell temperatures are maintained.
2. Verify the Battery Status
There are chances that the battery of your Arlo doorbell has drained due to which it is not working. To check this, we recommend you press the doorbell button and let its LED illuminate. If LED does not light up, you are suggested to charge the doorbell battery to 100% and check if it starts working.
3. Check the WiFi Connection
Perhaps, the Arlo doorbell is not working because there is no internet connection. Thus, you should check that there is an active internet connection and you have connected your video/audio doorbell to the WiFi router using the correct instructions. We also recommend you verify if other devices can connect to your router.
4. Move Router Closer to Doorbell
There is a high possibility that the distance between your doorbell and the WiFi router is not up-to-mark. Also, WiFi range is reduced by wall, ceiling, or other physical obstructions. So, you should ensure that there are no major obstructions or equipment present between your WiFi router and video doorbell.
You are also suggested to reduce the gap between the router and doorbell to fix the problem. Is your Arlo doorbell working now and started sending alerts? No? Read the next technique then.
Restart Your Doorbell
Try to restart your video/audio doorbell. This can be done by removing the doorbell’s battery for 15 seconds and re-inserting. After that, you can wait till your device responds.
5. Factory Reset the Arlo Doorbell
If you are still tired of the Arlo doorbell not working problem, you are suggested to reset your doorbell. To reset the doorbell, get your hands on the Release pin that you received with your product. You can also use a paperclip or a similar object. Use the chosen object to press and hold the Reset button on the back of the Arlo doorbell for 15 seconds. This will make your doorbell run on the default factory settings and also remove it from your Arlo account. Thus, use the Arlo login details to add doorbell camera again.
The Final Words
This was all about what to do to resolve the Arlo doorbell not working issue. You got to know that the problem can arise if the doorbell is not charged or is operating under wrong temperatures. You also learned that internet connection issue can also create such a problem. Now, we hope that after taking the help of the information given above, you will be able to make your doorbell up and running once again.
